Skip to content

Redarc Battery Isolator to suit LiFePO4 Battery

by REDARC
Original price $180.74 - Original price $180.74
Original price
$180.74
$180.74 - $180.74
Current price $180.74
SKU SBI12-LLD

The SBI12-LLD is a microprocessor-controlled Load Disconnect Isolator. The SBI12-LLD is designed for use in lithium battery applications (LiFePO4) as a system to protect the battery from being excessively discharged by auxiliary loads, enabling the auxiliary battery to remain above the level at which internal protection circuitry would activate. Falling below this threshold would prevent many chargers from recharging the battery.

Put simply, once the auxiliary battery has been overly discharged, the Load Disconnect Isolator will turn off any connected loads. Similarly, if the battery climbs back above a suitable level, the Load Disconnect Isolator will restore power to the connected loads.

 Spike protection

 The SBI12-LLD Smart Start battery isolator incorporates a number of spike protection components specifically designed to reduce the risk of damaging the unit. It is also designed to prevent any spikes generated by the solenoid coil from affecting vehicle equipment.

 Features

  • Overmould design
  • Compact in size and easy to install
  • Silver contacts for longer life and suitable for marine applications
  • Power saving technology
  • Fault indication
  • Fully surge protected

 

System Voltage 12V Nominal
Turn ON Voltage 11.0V
Turn OFF Voltage 10.5V
Turn ON Delay 10 sec
Turn OFF Delay 2 sec
Max. Cont. Current 100 Amps
Max. Inrush Current 400Amps
Standby Current < 5mA
Operating Current <0.1A
Dimensions 75 x 70 x 80mm
Weight (g) 200
Warranty 2
Standards CE, C-Tick, AS/NZS CISPR11:2004
Main Stud Torque 5-6.2 Nm